CRAFT · BEGINNER
How to make a paintbrush horizontal rest with vibe CAD
Give craft paintbrushes a temporary horizontal resting place with handle-sized saddles and space beneath the bristles for a removable liner.
Concept illustration. Customize the prompt and upload your CAD.
A craft-bench rest for brush handles, not a protective container
01 / START WITH THE REAL OBJECT
Measure before you prompt.
- Measure handle diameters at the points that will touch the rest.
- Measure the longest bristle projection beyond those contact points.
- Record the desired number of brushes and spacing between loaded brush tips.
- Measure the liner footprint and choose saddle gaps through a small sample.
State units. If a dimension is missing, have your agent ask for it.
02 / GIVE YOUR AGENT A CLEAR BRIEF
Copy this into your CAD conversation.
Use Claude or another agent with a CAD tool such as OpenSCAD, CadQuery or your existing modeler. Fill in your measurements and keep the source editable.
Build a brush rest with handle_diameters, saddle_pitch, support_height, bristle_projection, liner_width and liner_depth. Support handles only and leave bristles clear of the body. Ask for brush sizes and the intended removable liner. Use open rounded saddles without claiming chemical resistance or a universal handle fit.03 / INSPECT AS YOU BUILD
Model it in deliberate steps.
Place the bristle envelope
Draw the brushes in side view using the actual support points. Reserve an open region below and beyond the bristles for the liner.
Build the handle saddles
Create two low rails with broad rounded notches at matching positions. Keep the spacing adjustable so different handle tapers can be accommodated.
Make cleanup accessible
Keep the rest open beneath the bristle area and avoid hidden paint-catching cavities. Add a separate liner outline as a reference, not as a supplied accessory.
04 / VALIDATE THE FIRST PROTOTYPE
Check the fit and intended use.
- Use a cardboard side profile with clean brushes to check handle contact and bristle clearance.
- Inspect the top view for brush-tip overlap when every saddle is occupied.
- Plan a saddle sample and check it with the real handles before deciding the final notch gaps.
Material
PLA or PETG may be considered for the rest.
List critical dimensions and acceptable deviations in your request. See clearance and fit and material grades.
05 / START YOUR ORDER
Upload your CAD. Get an exact quote.
Customize the prompt, export your model and submit it with quantity, intended use and fit requirements. We review your request and send a nonbinding quote; the payment link follows if you accept.
No charge at submission. Current firm print scope is PLA/PETG shipped within the contiguous US/DC.