CRAFT · BEGINNER
How to make an embroidery-floss bobbin rack with vibe CAD
Store wound floss bobbins by color in open slots that account for both the bobbin body and the extra width of the wrapped thread.
Concept illustration. Customize the prompt and upload your CAD.
A storage rack for craft bobbins, not a tensioning device or a guarantee against thread tangling.
01 / START WITH THE REAL OBJECT
Measure before you prompt.
- Measure a full bobbin’s width, height and wound thickness, not just the empty card.
- Record any protruding winding tabs and the area occupied by its color label.
- Choose the number of slots and the available drawer depth.
- Measure finger spacing with several full bobbins placed side by side.
State units. If a dimension is missing, have your agent ask for it.
02 / GIVE YOUR AGENT A CLEAR BRIEF
Copy this into your CAD conversation.
Use Claude or another agent with a CAD tool such as OpenSCAD, CadQuery or your existing modeler. Fill in your measurements and keep the source editable.
Model a floss rack with bobbin_width, bobbin_height, wound_thickness, slot_count, slot_pitch, insertion_depth and label_keepout. Use open slots with low separators. Ask for full-bobbin dimensions and the label location. Keep the slot gap user-selected or coupon-derived; do not assume a standard bobbin format.03 / INSPECT AS YOU BUILD
Model it in deliberate steps.
Define the full bobbin envelope
Sketch the wound bobbin including tabs and thread bulges. Mark the label region so the rack does not hide the color identification.
Pattern the open slots
Create a short supporting base and separators at the chosen pitch. Keep the upper portion open for lifting bobbins and leave space for trailing thread ends.
Provide row identification
Add a front label strip outside the slots. Round separator tops and keep the identification features away from exposed thread.
04 / VALIDATE THE FIRST PROTOTYPE
Check the fit and intended use.
- Arrange full bobbins in a cardboard slot mockup to verify pickup and label visibility.
- Inspect the narrowest slot using the fullest bobbin profile rather than an empty-card measurement.
- Check the exported slot count and overall length, then plan one representative slot as a fit sample.
Material
PLA or PETG may be explored for the rack.
List critical dimensions and acceptable deviations in your request. See clearance and fit and material grades.
05 / START YOUR ORDER
Upload your CAD. Get an exact quote.
Customize the prompt, export your model and submit it with quantity, intended use and fit requirements. We review your request and send a nonbinding quote; the payment link follows if you accept.
No charge at submission. Current firm print scope is PLA/PETG shipped within the contiguous US/DC.