ORGANIZATION · BEGINNER
How to make a flatpack hardware-packet file with vibe CAD
Keep labeled fastener packets from a furniture project upright and separated, preserving the original packet labels while leaving each packet easy to remove.
Concept illustration. Customize the prompt and upload your CAD.
A storage aid for unopened or resealed hardware packets, not a guide to hardware substitution or assembly suitability.
01 / START WITH THE REAL OBJECT
Measure before you prompt.
- Measure the widest packet including its sealed edges and printed label region.
- Measure the thickest filled packet without squeezing its contents flat.
- Record the number of packet groups and the available shelf footprint.
- Choose divider height and pickup spacing using the actual filled packets.
State units. If a dimension is missing, have your agent ask for it.
02 / GIVE YOUR AGENT A CLEAR BRIEF
Copy this into your CAD conversation.
Use Claude or another agent with a CAD tool such as OpenSCAD, CadQuery or your existing modeler. Fill in your measurements and keep the source editable.
Create a packet file with packet_widths, filled_thicknesses, group_count, divider_height, slot_pitch and label_keepouts. Use open-top compartments with low front edges. Ask for filled packet dimensions and the order used in assembly instructions. Do not replace the original hardware identification with guessed fastener specifications.03 / INSPECT AS YOU BUILD
Model it in deliberate steps.
Preserve the packet identities
Arrange packets in the order they appear in the project instructions. Mark the original label area and keep it visible above the front edge.
Size flexible packet spaces
Create compartments around the filled packet envelopes, leaving room for their irregular shapes. Avoid narrow slots based only on empty packaging thickness.
Add temporary project labels
Place replaceable label recesses on the front of the file. Keep separators low enough to grip a packet near its sealed edge without pulling on the contents.
04 / VALIDATE THE FIRST PROTOTYPE
Check the fit and intended use.
- Try the layout with filled packets in a cardboard mockup and confirm labels remain readable.
- Inspect the largest packet’s removal path and ensure it does not require folding across a sharp divider.
- Compare exported compartment widths with the measured packet list and plan one slot sample if fit is uncertain.
Material
PLA or PETG may be considered for the file.
List critical dimensions and acceptable deviations in your request. See clearance and fit and material grades.
05 / START YOUR ORDER
Upload your CAD. Get an exact quote.
Customize the prompt, export your model and submit it with quantity, intended use and fit requirements. We review your request and send a nonbinding quote; the payment link follows if you accept.
No charge at submission. Current firm print scope is PLA/PETG shipped within the contiguous US/DC.