ORGANIZATION · BEGINNER
How to make a drawer screw-length sorter with vibe CAD
Separate loose screws by measured length and head style in a removable drawer tray with readable labels and accessible pickup bays.
Concept illustration. Customize the prompt and upload your CAD.
A storage organizer, not a hardware gauge or an assessment of a screw’s structural suitability.
01 / START WITH THE REAL OBJECT
Measure before you prompt.
- Measure the longest screw including its head and the widest head diameter.
- Record the length groups and approximate quantity assigned to each bay.
- Measure the drawer interior and the clearance beneath the drawer above it.
- Choose pickup recesses using the actual screws and your usual handling method.
State units. If a dimension is missing, have your agent ask for it.
02 / GIVE YOUR AGENT A CLEAR BRIEF
Copy this into your CAD conversation.
Use Claude or another agent with a CAD tool such as OpenSCAD, CadQuery or your existing modeler. Fill in your measurements and keep the source editable.
Create a hardware sorter with screw_lengths, head_diameters, bay_quantities, drawer_width, drawer_depth, tray_height and label_width. Use shallow open bays and a continuous floor. Ask how screw length is being recorded and request the actual drawer dimensions. Do not infer thread type or hardware suitability from a storage label.03 / INSPECT AS YOU BUILD
Model it in deliberate steps.
Define consistent labels
Decide whether the recorded length includes the head and use that convention throughout the tray. Separate visually similar head styles before assigning bays.
Size the compartments
Allocate longer bays to long screws and wider bays to larger quantities. Leave room beside the hardware for fingers or the intended pickup tool.
Add access and identification
Create front label recesses and broad corner transitions. Keep labels outside the hardware space and preserve uninterrupted walls between neighboring length groups.
04 / VALIDATE THE FIRST PROTOTYPE
Check the fit and intended use.
- Arrange representative screws on a paper layout and confirm the longest item lies entirely within its bay.
- Inspect the tray section against drawer height with the largest screw head included.
- Check the exported bay labels and dimensions; request a corner sample if pickup access or finish remains uncertain.
Material
PLA or PETG can be considered for the tray.
List critical dimensions and acceptable deviations in your request. See clearance and fit and material grades.
05 / START YOUR ORDER
Upload your CAD. Get an exact quote.
Customize the prompt, export your model and submit it with quantity, intended use and fit requirements. We review your request and send a nonbinding quote; the payment link follows if you accept.
No charge at submission. Current firm print scope is PLA/PETG shipped within the contiguous US/DC.