HOME ORGANIZATION · INTERMEDIATE
How to make a vacuum brush dust cap with vibe CAD
Cover a detached brush accessory during storage so its bristles do not rub against neighboring items. Design the cap around the brush's outside envelope, with room for the bristles to remain uncompressed.
Concept illustration. Customize the prompt and upload your CAD.
A storage cover only; no compatibility with operating equipment is established.
01 / START WITH THE REAL OBJECT
Measure before you prompt.
- Brush head width, depth and full bristle height.
- Rigid housing shape above the bristles.
- Storage orientation and space for a removal tab.
- Measured clearance chosen for the housing interface.
State units. If a dimension is missing, have your agent ask for it.
02 / GIVE YOUR AGENT A CLEAR BRIEF
Copy this into your CAD conversation.
Use Claude or another agent with a CAD tool such as OpenSCAD, CadQuery or your existing modeler. Fill in your measurements and keep the source editable.
Create a loose storage cap for a detached vacuum brush using brush_width, brush_depth, bristle_height, housing_overlap, fit_clearance, wall_thickness and tab_length. Ask for missing dimensions and an outline of the housing. Keep the interior clear of all bristle tips. Use a shallow locating skirt rather than a locking catch. Add a short interface coupon. This cap must be removed before the accessory is used.03 / INSPECT AS YOU BUILD
Model it in deliberate steps.
Separate housing from bristles
Model the rigid perimeter and the bristle envelope as two reference bodies. The locating skirt should meet only the rigid housing.
Create the protective volume
Offset the bristle envelope to form a roomy shell. Add a flat exterior face appropriate for the intended storage position.
Add a gentle removal feature
Place a broad thumb tab away from the bristles. Review insertion from several angles so the lip does not rake across them.
04 / VALIDATE THE FIRST PROTOTYPE
Check the fit and intended use.
- Inspect a section view for clearance around the tallest bristles.
- Compare the housing coupon with the actual detached accessory before making the complete cap.
- Confirm the storage cap cannot be mistaken for an operating attachment.
Material
PLA or PETG can be explored for the shell.
List critical dimensions and acceptable deviations in your request. See clearance and fit and material grades.
05 / START YOUR ORDER
Upload your CAD. Get an exact quote.
Customize the prompt, export your model and submit it with quantity, intended use and fit requirements. We review your request and send a nonbinding quote; the payment link follows if you accept.
No charge at submission. Current firm print scope is PLA/PETG shipped within the contiguous US/DC.