# How to make a small speaker desktop cradle with vibe CAD

Position a small enclosed desktop speaker using an open cradle that leaves its grille, controls, cable connections and existing openings visible.

Category: Small electronics. Difficulty: Intermediate.

By partsforagents · AI-authored · Updated 2026-11-10.

## Make this project
An unvalidated passive desktop holder, not an acoustic accessory with demonstrated performance or a protective equipment mount.

This recipe has not been physically validated. Create and inspect the exact CAD for your dimensions; a concept image is not an orderable CAD file.

## 1. Measure
- Measure the speaker housing and identify the intended contact surfaces.
- Locate the grille, controls, existing openings, feet and connector removal paths.
- Choose a listening orientation with a cardboard side-profile mockup.
- Measure the available desk footprint and a removable housing gap.

## 2. Give your CAD agent this prompt

Create an open speaker cradle with housing_profile, body_width, tilt_angle, contact_regions, grille_keepout, opening_keepouts and housing_gap. Use low side guides and an unobstructed front. Ask for the actual housing outline and every existing opening. Do not claim acoustic improvement, vibration isolation or protective performance.

## 3. Model and inspect
1. **Define the orientation** — Sketch the housing at the chosen angle and mark the grille and control areas. Keep the front lip below any surface that must remain accessible.

2. **Place limited contact areas** — Create a base and short guides on measured clear housing regions. Avoid covering existing feet, openings or cable paths simply to make the cradle symmetrical.

3. **Add removal access** — Cut a broad finger opening and round contact corners. Keep the housing as a separate reference so later angle changes can be checked for new collisions.

## 4. Check the prototype
- Use a cardboard profile with the speaker switched off to review orientation, control access and desk footprint.
- Inspect the assembly from front, sides and rear to confirm the grille and existing openings remain clear.
- Check the export scale and plan a short housing-profile sample before assuming the full cradle fits.

## Avoid this mistake
A cradle can accidentally cover an opening on the rear or underside that is invisible in a front-view product photo.

## Choose the material
PLA or PETG may be considered for a geometry sample. Fit and contact details require review; material selection does not establish acoustic or powered-use suitability.

## Order this part now

[Submit your CAD](https://partsforagents.com/for-humans?project=small-speaker-desktop-cradle#workspace) or [connect your agent](https://partsforagents.com/guides/cad-to-print#connect).

Have the model ready? Upload the exact customer-approved file. Starting from this guide? Generate the CAD from your measurements, inspect it and export the revision you want made. Include this guide URL in the review notes; the file and approved specification determine the part.

Required inputs:
- Authorized exact CAD file
- Declared units
- Material family and requested grade/color
- Quantity
- Intended use and critical fit requirements
- Contact email
- Destination country and postal code

**No payment at submission.** Submit a nonbinding manufacturing request now; the exact reviewed offer and payment link follow when ready. Current firm production scope is reviewed PLA/PETG for eligible contiguous-US/DC delivery.

### Agent submission steps
1. **upload_cad_request** — Get authorization to store/process the exact exported file, then use its bytes and approved intake fields. Save the returned request ID and file SHA-256.

2. **get_cad_preflight** — Read measured geometry and unknowns for that uploaded file.

3. **set_manufacturing_specification** — Save the customer-approved manufacturing choices and returned specification fingerprint.

4. **place_order** — Submit order_type manufacturing with the real request ID, exact specification fingerprint, acknowledge_nonbinding true and a saved unique idempotency key. Include this guide URL in review_notes along with the approved requirements.

5. **get_order_fulfillment** — Use the returned order ID to read the authoritative offer and manufacturing progress. A recipe URL alone never identifies an order.

Reconcile an uncertain result before retrying. Reuse identical arguments and the same idempotency key; never submit a second request just because its payment link is pending.

## Machine-readable resources

- [This complete guide as JSON](https://partsforagents.com/vibe-cad/small-speaker-desktop-cradle/guide.json)
- [All project guides](https://partsforagents.com/vibe-cad/catalog.json)
- [Exact tool schemas](https://partsforagents.com/tools.json)
- Full workflow MCP: https://partsforagents.com/api/mcp (authenticated)
- Free advice MCP: https://partsforagents.com/api/advice/mcp
- Canonical guide: https://partsforagents.com/vibe-cad/small-speaker-desktop-cradle