{"schema_version":"1.0","kind":"vibe_cad_project_recipe","updated":"2026-11-10","author":"partsforagents","authorship":"AI-authored","slug":"small-display-module-angled-frame","title":"How to make a small display-module angled frame with vibe CAD","summary":"Frame a small display for an unpowered interface mockup, keeping its visible area, circuit board, ribbon connector and fasteners represented separately.","category":"Small electronics","difficulty":"Intermediate","measurements":["Measure the active display window and the full outer module dimensions.","Locate mounting holes, bezel overlaps and components behind the display.","Measure the ribbon or connector removal envelope without forcing a new cable bend.","Choose a viewing angle and a front margin using a paper interface mockup."],"prompt":"Model an angled display frame with active_width, active_height, module_outline, hole_centers, rear_keepouts, view_angle and bezel_overlap. Keep the back open and use measured mounting hardware. Ask for the active-area offset, rear component depth and connector path. Do not assume the visible screen is centered on its board.","steps":[{"title":"Align the visible window","detail":"Place the active area at its measured offset within the module outline. Build the front opening from that area rather than from the board center."},{"title":"Add the angled frame","detail":"Create a shallow perimeter and side feet at the chosen angle. Put mounting features outside the active window and maintain access to the rear."},{"title":"Reserve the connector route","detail":"Cut an open rear passage matching the measured connector envelope. Keep the ribbon path free and avoid adding an unmeasured fold into the design."}],"checks":["Overlay a paper screen image on the front view and check every edge of the intended visible area.","Inspect the rear assembly for interference with components, fasteners and connector removal.","Request a mounting-hole or bezel-section sample before assuming the module can be installed without pressure."],"pitfall":"A symmetric bezel can obscure an off-center display; measure the active window’s offset from the actual module edges.","scope":"An unvalidated passive frame for an unpowered interface prototype, not a protective screen enclosure or finished electronic product.","materialNotes":"PLA or PETG are possible starting choices for the frame. Fit and installation force require a sample; no material choice validates powered operation or display protection.","links":{"html":"https://partsforagents.com/vibe-cad/small-display-module-angled-frame","markdown":"https://partsforagents.com/vibe-cad/small-display-module-angled-frame/guide.md","json":"https://partsforagents.com/vibe-cad/small-display-module-angled-frame/guide.json","catalog":"https://partsforagents.com/vibe-cad/catalog.json","order":"https://partsforagents.com/for-humans?project=small-display-module-angled-frame#workspace","agent_handoff":"https://partsforagents.com/guides/cad-to-print#connect","full_mcp":"https://partsforagents.com/api/mcp","free_advice_mcp":"https://partsforagents.com/api/advice/mcp","tool_schemas":"https://partsforagents.com/tools.json"},"design_status":{"physical_validation":"not_physically_validated","cad_assets":[],"exact_customer_cad_required":true,"note":"This is a modeling recipe. Any illustration shows the concept; it is not the exact CAD file for an order."},"order_handoff":{"label":"Order this part now","url":"https://partsforagents.com/for-humans?project=small-display-module-angled-frame#workspace","ready_cad_action":"Upload the customer-approved exported CAD and submit a manufacturing request.","no_cad_action":"Use the measurements and prompt to create editable CAD, inspect it, then export the exact file to be made.","required_inputs":["Authorized exact CAD file","Declared units","Material family and requested grade/color","Quantity","Intended use and critical fit requirements","Contact email","Destination country and postal code"],"current_firm_production_scope":"Reviewed PLA/PETG jobs for eligible contiguous-US/DC delivery.","submission":{"new_request_status":"pending_review","binding":false,"payment_due_at_submission":false,"next":"The exact reviewed offer and payment link follow when the job and payment channel are ready."},"agent_steps":[{"tool":"upload_cad_request","instruction":"Get authorization to store/process the exact exported file, then use its bytes and approved intake fields. Save the returned request ID and file SHA-256."},{"tool":"get_cad_preflight","instruction":"Read measured geometry and unknowns for that uploaded file."},{"tool":"set_manufacturing_specification","instruction":"Save the customer-approved manufacturing choices and returned specification fingerprint."},{"tool":"place_order","instruction":"Submit order_type manufacturing with the real request ID, exact specification fingerprint, acknowledge_nonbinding true and a saved unique idempotency key. Include this guide URL in review_notes along with the approved requirements."},{"tool":"get_order_fulfillment","instruction":"Use the returned order ID to read the authoritative offer and manufacturing progress. A recipe URL alone never identifies an order."}],"retry_policy":"Reconcile an uncertain result before retrying. Reuse identical arguments and the same idempotency key; never submit a second request just because its payment link is pending.","tool_schema_url":"https://partsforagents.com/tools.json"}}