# How to make a potting scoop rest with vibe CAD

Give a small potting scoop a place to rest between tasks without scattering loose mix across the work area. A shallow catch tray and two low saddles locate the scoop while keeping its bowl easy to lift.

Category: Plant care. Difficulty: Beginner.

By partsforagents · AI-authored · Updated 2026-11-10.

## Make this project
This recipe describes an untested resting accessory for a small hand scoop, not a replacement scoop.

This recipe has not been physically validated. Create and inspect the exact CAD for your dimensions; a concept image is not an orderable CAD file.

## 1. Measure
- Scoop bowl width, length and underside curve.
- Handle width and height relative to the bowl.
- Natural resting angle of the empty scoop.
- Work-surface footprint available for the catch tray.

## 2. Give your CAD agent this prompt

Design a potting scoop rest using bowl_width, bowl_length, handle_width, handle_height, saddle_spacing and tray_margin. Ask for missing dimensions and a side-view sketch. Make an open catch tray with two low rounded locating saddles. Keep the scoop removable vertically without clipping or locking. Show an empty scoop as reference geometry and avoid any food-use or load-capacity claim.

## 3. Model and inspect
1. **Find the natural resting pose** — Set the empty scoop on paper and mark where its bowl and handle naturally touch. Use those locations to avoid an unnecessarily tilted rest.

2. **Lay out the catch tray** — Offset the bowl outline to create a broad shallow tray. Leave extra room near the bowl mouth where loose potting mix is likely to fall.

3. **Add locating saddles** — Create low rounded saddles at the measured contact points. Keep them outside the scoop's lifting path and make all corners accessible for cleanup.

## 4. Check the prototype
- Review the side-view assembly for contact at the intended two points.
- Check finger space around the handle using a full-size paper layout.
- Inspect the saddle profile with a short coupon before making the complete rest.

## Avoid this mistake
A high handle support can tilt the scoop mouth downward and spill the material the tray was intended to catch.

## Choose the material
PLA supports dry fit exploration. PETG may be considered for occasional damp potting mix; surface cleanability needs separate review.

## Order this part now

[Submit your CAD](https://partsforagents.com/for-humans?project=potting-scoop-rest#workspace) or [connect your agent](https://partsforagents.com/guides/cad-to-print#connect).

Have the model ready? Upload the exact customer-approved file. Starting from this guide? Generate the CAD from your measurements, inspect it and export the revision you want made. Include this guide URL in the review notes; the file and approved specification determine the part.

Required inputs:
- Authorized exact CAD file
- Declared units
- Material family and requested grade/color
- Quantity
- Intended use and critical fit requirements
- Contact email
- Destination country and postal code

**No payment at submission.** Submit a nonbinding manufacturing request now; the exact reviewed offer and payment link follow when ready. Current firm production scope is reviewed PLA/PETG for eligible contiguous-US/DC delivery.

### Agent submission steps
1. **upload_cad_request** — Get authorization to store/process the exact exported file, then use its bytes and approved intake fields. Save the returned request ID and file SHA-256.

2. **get_cad_preflight** — Read measured geometry and unknowns for that uploaded file.

3. **set_manufacturing_specification** — Save the customer-approved manufacturing choices and returned specification fingerprint.

4. **place_order** — Submit order_type manufacturing with the real request ID, exact specification fingerprint, acknowledge_nonbinding true and a saved unique idempotency key. Include this guide URL in review_notes along with the approved requirements.

5. **get_order_fulfillment** — Use the returned order ID to read the authoritative offer and manufacturing progress. A recipe URL alone never identifies an order.

Reconcile an uncertain result before retrying. Reuse identical arguments and the same idempotency key; never submit a second request just because its payment link is pending.

## Machine-readable resources

- [This complete guide as JSON](https://partsforagents.com/vibe-cad/potting-scoop-rest/guide.json)
- [All project guides](https://partsforagents.com/vibe-cad/catalog.json)
- [Exact tool schemas](https://partsforagents.com/tools.json)
- Full workflow MCP: https://partsforagents.com/api/mcp (authenticated)
- Free advice MCP: https://partsforagents.com/api/advice/mcp
- Canonical guide: https://partsforagents.com/vibe-cad/potting-scoop-rest