# How to make a portable audio-recorder desk stand with vibe CAD

Angle a portable recorder toward its user while keeping buttons, microphones, connectors and its removable battery-door area outside the stand geometry.

Category: Small electronics. Difficulty: Intermediate.

By partsforagents · AI-authored · Updated 2026-11-10.

## Make this project
An unvalidated passive desktop stand, with no acoustic, vibration-isolation or protective performance claim.

This recipe has not been physically validated. Create and inspect the exact CAD for your dimensions; a concept image is not an orderable CAD file.

## 1. Measure
- Measure the recorder body and identify the surfaces intended to rest in the stand.
- Locate microphones, controls, display edges, cable sockets and removable covers.
- Choose the viewing angle with a cardboard mockup at the actual desk position.
- Measure finger access and connected-plug envelopes while the recorder is switched off.

## 2. Give your CAD agent this prompt

Create a passive stand using body_width, body_depth, support_profile, viewing_angle, display_keepout, microphone_keepouts and connector_keepouts. Use an open back and low side guides. Ask for missing feature positions and preferred pickup direction. Avoid enclosing the recorder or claiming any improvement to its recording performance.

## 3. Model and inspect
1. **Set the view and access** — Sketch the recorder at the chosen angle and mark every control and opening. Keep the front lip below the lowest control or display area.

2. **Build sparse contact surfaces** — Add a base and two short side guides on measured clear housing regions. Leave the microphone and connector areas open in all directions.

3. **Provide easy removal** — Add a broad finger opening beneath an accessible housing edge. Round contact corners and preserve a straight lift-out path for the recorder.

## 4. Check the prototype
- Use a cardboard side profile to check viewing angle and control reach with the recorder switched off.
- Inspect the assembly for blocked microphones, cable exits or cover-removal paths.
- Verify the export dimensions and request a housing-profile sample before assuming the final stand fits.

## Avoid this mistake
The recorder’s overall rectangle does not reveal microphone locations or cover seams; map those features before adding supporting walls.

## Choose the material
PLA or PETG may be explored for the stand. Evaluate contact surfaces and fit with a sample; neither material choice establishes recording quality or operating suitability.

## Order this part now

[Submit your CAD](https://partsforagents.com/for-humans?project=portable-audio-recorder-desk-stand#workspace) or [connect your agent](https://partsforagents.com/guides/cad-to-print#connect).

Have the model ready? Upload the exact customer-approved file. Starting from this guide? Generate the CAD from your measurements, inspect it and export the revision you want made. Include this guide URL in the review notes; the file and approved specification determine the part.

Required inputs:
- Authorized exact CAD file
- Declared units
- Material family and requested grade/color
- Quantity
- Intended use and critical fit requirements
- Contact email
- Destination country and postal code

**No payment at submission.** Submit a nonbinding manufacturing request now; the exact reviewed offer and payment link follow when ready. Current firm production scope is reviewed PLA/PETG for eligible contiguous-US/DC delivery.

### Agent submission steps
1. **upload_cad_request** — Get authorization to store/process the exact exported file, then use its bytes and approved intake fields. Save the returned request ID and file SHA-256.

2. **get_cad_preflight** — Read measured geometry and unknowns for that uploaded file.

3. **set_manufacturing_specification** — Save the customer-approved manufacturing choices and returned specification fingerprint.

4. **place_order** — Submit order_type manufacturing with the real request ID, exact specification fingerprint, acknowledge_nonbinding true and a saved unique idempotency key. Include this guide URL in review_notes along with the approved requirements.

5. **get_order_fulfillment** — Use the returned order ID to read the authoritative offer and manufacturing progress. A recipe URL alone never identifies an order.

Reconcile an uncertain result before retrying. Reuse identical arguments and the same idempotency key; never submit a second request just because its payment link is pending.

## Machine-readable resources

- [This complete guide as JSON](https://partsforagents.com/vibe-cad/portable-audio-recorder-desk-stand/guide.json)
- [All project guides](https://partsforagents.com/vibe-cad/catalog.json)
- [Exact tool schemas](https://partsforagents.com/tools.json)
- Full workflow MCP: https://partsforagents.com/api/mcp (authenticated)
- Free advice MCP: https://partsforagents.com/api/advice/mcp
- Canonical guide: https://partsforagents.com/vibe-cad/portable-audio-recorder-desk-stand