# How to make a plant pruning scrap tray with vibe CAD

Collect fallen leaves and dry trimming scraps beside an ornamental houseplant. A wide shallow tray with one lowered pouring corner makes cleanup simpler without enclosing the pot or becoming part of its watering system.

Category: Plant care. Difficulty: Beginner.

By partsforagents · AI-authored · Updated 2026-11-10.

## Make this project
An unprinted collection tray for ornamental plant scraps, not a cutting board or horticultural treatment tool.

This recipe has not been physically validated. Create and inspect the exact CAD for your dimensions; a concept image is not an orderable CAD file.

## 1. Measure
- Available work-surface width and depth beside the plant.
- Typical leaf length and size of collected scraps.
- Preferred rim height for sweeping in debris.
- Width of the waste container opening used for emptying.

## 2. Give your CAD agent this prompt

Create a shallow ornamental-plant scrap tray with tray_width, tray_depth, rim_height, pour_corner_width, corner_radius and wall_thickness. Ask for missing dimensions and the preferred pouring corner. Add a broad flat floor and a lowered front edge for sweeping in dry scraps. Keep the tray separate from the pot. Do not add cutting features, watering channels or food-use claims.

## 3. Model and inspect
1. **Size the collection area** — Arrange a few representative fallen leaves on paper. Allow room to sweep them in without forcing the tray beneath the plant or its pot.

2. **Build the shallow tray** — Extrude a rounded rectangle and add a low perimeter rim. Lower one working edge while retaining enough corner height to guide loose scraps.

3. **Shape the pouring corner** — Taper one corner toward the measured waste-container opening. Keep the transition broad and accessible rather than making a narrow enclosed spout.

## 4. Check the prototype
- Compare the outline with the available work surface.
- Review the pouring corner against a paper outline of the waste opening.
- Inspect internal corners for pockets that would be difficult to wipe.

## Avoid this mistake
A narrow funnel-like spout can trap curled leaves instead of helping them leave the tray.

## Choose the material
PLA can suit dry cleanup prototypes. PETG is a candidate for occasional damp contact, with cleaning behavior still unverified.

## Order this part now

[Submit your CAD](https://partsforagents.com/for-humans?project=plant-pruning-scrap-tray#workspace) or [connect your agent](https://partsforagents.com/guides/cad-to-print#connect).

Have the model ready? Upload the exact customer-approved file. Starting from this guide? Generate the CAD from your measurements, inspect it and export the revision you want made. Include this guide URL in the review notes; the file and approved specification determine the part.

Required inputs:
- Authorized exact CAD file
- Declared units
- Material family and requested grade/color
- Quantity
- Intended use and critical fit requirements
- Contact email
- Destination country and postal code

**No payment at submission.** Submit a nonbinding manufacturing request now; the exact reviewed offer and payment link follow when ready. Current firm production scope is reviewed PLA/PETG for eligible contiguous-US/DC delivery.

### Agent submission steps
1. **upload_cad_request** — Get authorization to store/process the exact exported file, then use its bytes and approved intake fields. Save the returned request ID and file SHA-256.

2. **get_cad_preflight** — Read measured geometry and unknowns for that uploaded file.

3. **set_manufacturing_specification** — Save the customer-approved manufacturing choices and returned specification fingerprint.

4. **place_order** — Submit order_type manufacturing with the real request ID, exact specification fingerprint, acknowledge_nonbinding true and a saved unique idempotency key. Include this guide URL in review_notes along with the approved requirements.

5. **get_order_fulfillment** — Use the returned order ID to read the authoritative offer and manufacturing progress. A recipe URL alone never identifies an order.

Reconcile an uncertain result before retrying. Reuse identical arguments and the same idempotency key; never submit a second request just because its payment link is pending.

## Machine-readable resources

- [This complete guide as JSON](https://partsforagents.com/vibe-cad/plant-pruning-scrap-tray/guide.json)
- [All project guides](https://partsforagents.com/vibe-cad/catalog.json)
- [Exact tool schemas](https://partsforagents.com/tools.json)
- Full workflow MCP: https://partsforagents.com/api/mcp (authenticated)
- Free advice MCP: https://partsforagents.com/api/advice/mcp
- Canonical guide: https://partsforagents.com/vibe-cad/plant-pruning-scrap-tray