# How to make a plant label card stand with vibe CAD

Place a readable plant-name card beside a decorative pot without inserting anything into the soil. A low stand holds a replaceable card at a measured angle and stays separate from the watering area.

Category: Plant care. Difficulty: Beginner.

By partsforagents · AI-authored · Updated 2026-11-10.

## Make this project
A proposed decorative label holder, not a plant identification or care recommendation system.

This recipe has not been physically validated. Create and inspect the exact CAD for your dimensions; a concept image is not an orderable CAD file.

## 1. Measure
- Label card width, height and thickness.
- Available shelf space beside the pot.
- Preferred viewing angle from the usual standing position.
- Distance needed to keep the base outside the drip tray.

## 2. Give your CAD agent this prompt

Create a freestanding plant label stand with card_width, card_thickness, slot_clearance, viewing_angle, base_depth and base_width. Ask for missing inputs and whether the card has a protective sleeve. Make a short slanted slot with a visible insertion stop and a broad flat base. Include a small slot coupon. Keep the stand separate from the plant, soil and drip tray.

## 3. Model and inspect
1. **Choose the reading angle** — Fold a paper mockup and view it from the normal approach to the shelf. Record the angle rather than assuming upright is easiest to read.

2. **Model the card slot** — Create a shallow slot around the actual card or sleeve thickness. Add a low backing surface that supports the card without hiding its text.

3. **Shape the base** — Extend the base behind the slot to suit the card's lean. Round its corners and leave a clear margin around the adjacent drip tray.

## 4. Check the prototype
- Check that the printed text area would remain visible above the slot.
- Review a slot coupon before choosing the final card clearance.
- Compare the base footprint with a paper template in the intended location.

## Avoid this mistake
A deep slot can swallow the bottom line of a label even when the card itself fits perfectly.

## Choose the material
PLA is an option for a dry indoor shelf. Consider PETG if occasional splashes are expected, while protecting the paper separately.

## Order this part now

[Submit your CAD](https://partsforagents.com/for-humans?project=plant-label-card-stand#workspace) or [connect your agent](https://partsforagents.com/guides/cad-to-print#connect).

Have the model ready? Upload the exact customer-approved file. Starting from this guide? Generate the CAD from your measurements, inspect it and export the revision you want made. Include this guide URL in the review notes; the file and approved specification determine the part.

Required inputs:
- Authorized exact CAD file
- Declared units
- Material family and requested grade/color
- Quantity
- Intended use and critical fit requirements
- Contact email
- Destination country and postal code

**No payment at submission.** Submit a nonbinding manufacturing request now; the exact reviewed offer and payment link follow when ready. Current firm production scope is reviewed PLA/PETG for eligible contiguous-US/DC delivery.

### Agent submission steps
1. **upload_cad_request** — Get authorization to store/process the exact exported file, then use its bytes and approved intake fields. Save the returned request ID and file SHA-256.

2. **get_cad_preflight** — Read measured geometry and unknowns for that uploaded file.

3. **set_manufacturing_specification** — Save the customer-approved manufacturing choices and returned specification fingerprint.

4. **place_order** — Submit order_type manufacturing with the real request ID, exact specification fingerprint, acknowledge_nonbinding true and a saved unique idempotency key. Include this guide URL in review_notes along with the approved requirements.

5. **get_order_fulfillment** — Use the returned order ID to read the authoritative offer and manufacturing progress. A recipe URL alone never identifies an order.

Reconcile an uncertain result before retrying. Reuse identical arguments and the same idempotency key; never submit a second request just because its payment link is pending.

## Machine-readable resources

- [This complete guide as JSON](https://partsforagents.com/vibe-cad/plant-label-card-stand/guide.json)
- [All project guides](https://partsforagents.com/vibe-cad/catalog.json)
- [Exact tool schemas](https://partsforagents.com/tools.json)
- Full workflow MCP: https://partsforagents.com/api/mcp (authenticated)
- Free advice MCP: https://partsforagents.com/api/advice/mcp
- Canonical guide: https://partsforagents.com/vibe-cad/plant-label-card-stand