# How to make a photo white card stand with vibe CAD

Position a small white or gray reference card beside a tabletop subject. Two low stands hold the card at a chosen angle, allowing repeatable placement without attaching anything to a camera or relying on printed color accuracy.

Category: Photography. Difficulty: Beginner.

By partsforagents · AI-authored · Updated 2026-11-10.

## Make this project
An untested holder for a small lightweight card, not a lighting stand or camera support.

This recipe has not been physically validated. Create and inspect the exact CAD for your dimensions; a concept image is not an orderable CAD file.

## 1. Measure
- Reference card width, height and thickness.
- Desired viewing angle relative to the tabletop.
- Space available beside the photographed object.
- Maximum stand width that stays out of the frame.

## 2. Give your CAD agent this prompt

Create a pair of small photo-card stands with card_thickness, slot_clearance, slot_depth, card_angle, foot_length and foot_width. Ask for missing dimensions and whether the card has a sleeve. Make broad low feet with a loose angled slot and a finger relief. Include a slot coupon. The printed part positions an existing card; it is not itself a calibrated color or exposure reference.

## 3. Model and inspect
1. **Mock up the card angle** — Use folded paper to hold the actual card in the intended photograph. Record the angle and mark positions where the stands will remain outside the composition.

2. **Model the locating slot** — Create a short slot around the actual card thickness. Add a rounded entry and keep the contact region below the card's visible reference area.

3. **Review the feet** — Extend the base around the leaning card in side view. Keep both stands identical and leave room to adjust their spacing along the lower edge.

## 4. Check the prototype
- Review a slot coupon before choosing final clearance.
- Check that the stand does not obscure the reference area's usable surface.
- Compare the footprint and card angle with the paper mockup.

## Avoid this mistake
Using the printed plastic as the reference surface confuses a positioning accessory with a calibrated photographic reference.

## Choose the material
PLA is an indoor prototype option. PETG is another candidate, but surface color is not a measurement standard.

## Order this part now

[Submit your CAD](https://partsforagents.com/for-humans?project=photo-white-card-stand#workspace) or [connect your agent](https://partsforagents.com/guides/cad-to-print#connect).

Have the model ready? Upload the exact customer-approved file. Starting from this guide? Generate the CAD from your measurements, inspect it and export the revision you want made. Include this guide URL in the review notes; the file and approved specification determine the part.

Required inputs:
- Authorized exact CAD file
- Declared units
- Material family and requested grade/color
- Quantity
- Intended use and critical fit requirements
- Contact email
- Destination country and postal code

**No payment at submission.** Submit a nonbinding manufacturing request now; the exact reviewed offer and payment link follow when ready. Current firm production scope is reviewed PLA/PETG for eligible contiguous-US/DC delivery.

### Agent submission steps
1. **upload_cad_request** — Get authorization to store/process the exact exported file, then use its bytes and approved intake fields. Save the returned request ID and file SHA-256.

2. **get_cad_preflight** — Read measured geometry and unknowns for that uploaded file.

3. **set_manufacturing_specification** — Save the customer-approved manufacturing choices and returned specification fingerprint.

4. **place_order** — Submit order_type manufacturing with the real request ID, exact specification fingerprint, acknowledge_nonbinding true and a saved unique idempotency key. Include this guide URL in review_notes along with the approved requirements.

5. **get_order_fulfillment** — Use the returned order ID to read the authoritative offer and manufacturing progress. A recipe URL alone never identifies an order.

Reconcile an uncertain result before retrying. Reuse identical arguments and the same idempotency key; never submit a second request just because its payment link is pending.

## Machine-readable resources

- [This complete guide as JSON](https://partsforagents.com/vibe-cad/photo-white-card-stand/guide.json)
- [All project guides](https://partsforagents.com/vibe-cad/catalog.json)
- [Exact tool schemas](https://partsforagents.com/tools.json)
- Full workflow MCP: https://partsforagents.com/api/mcp (authenticated)
- Free advice MCP: https://partsforagents.com/api/advice/mcp
- Canonical guide: https://partsforagents.com/vibe-cad/photo-white-card-stand