TABLETOP GAMES · BEGINNER
How to make a miniature base parking tray with vibe CAD
Arrange generic tabletop miniatures by the measured size of their bases. Shallow nests locate the bases while keeping the figures, paintwork and projecting details clear of dividers and neighboring pieces.
Concept illustration. Customize the prompt and upload your CAD.
A stationary organization tray for user-owned pieces, not a protective miniature transport system.
01 / START WITH THE REAL OBJECT
Measure before you prompt.
- Base diameters or rectangular base dimensions.
- Base thickness and any beveled edge.
- Maximum figure overhang beyond each base.
- Available shelf or game-box footprint.
State units. If a dimension is missing, have your agent ask for it.
02 / GIVE YOUR AGENT A CLEAR BRIEF
Copy this into your CAD conversation.
Use Claude or another agent with a CAD tool such as OpenSCAD, CadQuery or your existing modeler. Fill in your measurements and keep the source editable.
Create a miniature-base parking tray with base_sizes, pocket_clearance, pocket_depth, figure_overhangs, pocket_spacing and tray_margin. Ask for missing measurements and whether bases are round or rectangular. Use shallow loose nests with finger openings. Represent figures only as neutral clearance volumes; do not reproduce character artwork. Keep the design free of magnets, locking clips and transport-retention claims.03 / INSPECT AS YOU BUILD
Model it in deliberate steps.
Separate base size from figure reach
Measure each base and then the farthest projecting detail above it. Use the larger envelope when deciding how close neighboring pockets can sit.
Lay out the nests
Place the largest clearance volumes first. Make shallow pockets around the base outlines and leave open finger access on a side without overhanging details.
Review vertical removal
Lift each reference volume in the CAD assembly. Check that the neighboring figure envelopes do not block a straight upward removal path.
04 / VALIDATE THE FIRST PROTOTYPE
Check the fit and intended use.
- Compare a full-size paper plan with the actual figures resting on their bases.
- Review one pocket coupon before repeating a base size.
- Inspect pocket depth against beveled or textured base edges.
Material
PLA or PETG can be considered for the tray.
List critical dimensions and acceptable deviations in your request. See clearance and fit and material grades.
05 / START YOUR ORDER
Upload your CAD. Get an exact quote.
Customize the prompt, export your model and submit it with quantity, intended use and fit requirements. We review your request and send a nonbinding quote; the payment link follows if you accept.
No charge at submission. Current firm print scope is PLA/PETG shipped within the contiguous US/DC.