TABLETOP GAMES · BEGINNER
How to make a game box spacer with vibe CAD
Fill an unused gap beside an existing game insert with a lightweight hollow spacer. The shape follows the box's actual inner walls and corner radii, reducing loose movement without pressing on cards, boards or the box lid.
Concept illustration. Customize the prompt and upload your CAD.
A gap filler for storage organization, not a structural brace or protective shipping insert.
01 / START WITH THE REAL OBJECT
Measure before you prompt.
- Gap width and depth at both the floor and rim.
- Height of the neighboring insert or component stack.
- Box corner radius and any inward wall taper.
- Finger access needed to remove the spacer.
State units. If a dimension is missing, have your agent ask for it.
02 / GIVE YOUR AGENT A CLEAR BRIEF
Copy this into your CAD conversation.
Use Claude or another agent with a CAD tool such as OpenSCAD, CadQuery or your existing modeler. Fill in your measurements and keep the source editable.
Model a removable game-box spacer with gap_width, gap_depth, spacer_height, wall_thickness, corner_radius and fit_clearance. Ask for missing dimensions and whether the box walls taper. Use a hollow open-bottom shell with a broad top and a finger recess. Keep clearance from all neighboring components and the lid. Do not use an interference fit or claim transport protection.03 / INSPECT AS YOU BUILD
Model it in deliberate steps.
Measure the empty gap
Place the existing components in their normal arrangement. Measure the gap at several heights rather than assuming the cardboard walls are perfectly vertical.
Build the hollow shell
Create the outside footprint, then hollow the underside. Keep the top below the box's closing plane and avoid narrow protrusions near component stacks.
Add removal access
Cut a broad finger recess into an accessible side. Review the vertical lift path so the spacer can be removed without shifting the entire insert.
04 / VALIDATE THE FIRST PROTOTYPE
Check the fit and intended use.
- Try a cardboard block matching the proposed outer dimensions.
- Inspect the lid reference plane for clearance above the spacer.
- Compare the footprint against the box's actual rounded corners and taper.
Material
PLA is an indoor prototype option.
List critical dimensions and acceptable deviations in your request. See clearance and fit and material grades.
05 / START YOUR ORDER
Upload your CAD. Get an exact quote.
Customize the prompt, export your model and submit it with quantity, intended use and fit requirements. We review your request and send a nonbinding quote; the payment link follows if you accept.
No charge at submission. Current firm print scope is PLA/PETG shipped within the contiguous US/DC.