PHOTOGRAPHY · BEGINNER
How to make a filter case index tab with vibe CAD
Add readable index tabs to closed filter cases stored upright. A loose sleeve carries a paper label above the case edge without covering its latch, so similar cases can be distinguished without opening them.
Concept illustration. Customize the prompt and upload your CAD.
A labeling accessory.
01 / START WITH THE REAL OBJECT
Measure before you prompt.
- Closed case-edge thickness at the tab location.
- Edge radius and distance to the nearest latch or hinge.
- Label width, height and paper thickness.
- Available headroom above the stored case.
State units. If a dimension is missing, have your agent ask for it.
02 / GIVE YOUR AGENT A CLEAR BRIEF
Copy this into your CAD conversation.
Use Claude or another agent with a CAD tool such as OpenSCAD, CadQuery or your existing modeler. Fill in your measurements and keep the source editable.
Model a filter-case index sleeve with case_edge_thickness, edge_radius, sleeve_depth, sleeve_clearance, label_width and label_height. Ask for missing measurements and the latch location. Add a shallow paper-label pocket and a rounded loose sleeve. Include an interface coupon. Keep the tab removable and away from the case seam; do not alter the protective case or contact exposed glass.03 / INSPECT AS YOU BUILD
Model it in deliberate steps.
Choose an uninterrupted edge
Locate a short section clear of hinges, latches and opening seams. Measure that exact spot because molded case edges may vary in thickness.
Create the sleeve
Build an open channel around the measured edge profile. Add relief at the entry so it can slide on without catching the case texture.
Place the label
Put a small card pocket above the sleeve with a side opening. Keep the label within the storage compartment's measured headroom.
04 / VALIDATE THE FIRST PROTOTYPE
Check the fit and intended use.
- Review the sleeve coupon on the closed case before making the full tab.
- Inspect the digital assembly for interference with the latch and hinge.
- Check label visibility with cases arranged at their actual spacing.
Material
PLA or PETG can be explored for the sleeve.
List critical dimensions and acceptable deviations in your request. See clearance and fit and material grades.
05 / START YOUR ORDER
Upload your CAD. Get an exact quote.
Customize the prompt, export your model and submit it with quantity, intended use and fit requirements. We review your request and send a nonbinding quote; the payment link follows if you accept.
No charge at submission. Current firm print scope is PLA/PETG shipped within the contiguous US/DC.