# How to make a desk label-strip holder with vibe CAD

Make a replaceable label holder for a desk tray or project station, with a paper channel that can be changed without adhesives.

Category: Desk. Difficulty: Beginner.

By partsforagents · AI-authored · Updated 2026-11-10.

## Make this project
This is an unprinted replaceable desk label holder, not a validated sign mounting or attachment system.

This recipe has not been physically validated. Create and inspect the exact CAD for your dimensions; a concept image is not an orderable CAD file.

## 1. Measure
- Measure the label width and height after printing at the intended text size.
- Measure the thickest intended label stock or laminated strip.
- Choose a viewing angle and front margin that leaves all printed text visible.
- Determine the channel gap with a sample of the actual label material.

## 2. Give your CAD agent this prompt

Build a freestanding label-strip holder using label_width, label_height, label_thickness, viewing_angle, channel_gap, lip_height and end_clearance. Leave one end open for replacement. Ask for the paper stock and reading direction before choosing the opening side. Keep channel_gap independently editable for a printed fit coupon.

## 3. Model and inspect
1. **Frame the readable area** — Sketch the label at its viewing angle and mark the text rectangle. Place the retaining lips outside that rectangle so they cover only blank margins.

2. **Create the sliding channel** — Extrude the backing and upper and lower lips along the label width. Close the far end and leave the insertion end unobstructed.

3. **Add a removal notch** — Cut a small fingertip notch near the open end and round its edges. Keep the notch outside the printed text area and away from the lower supporting lip.

## 4. Check the prototype
- Overlay an actual label printout on the front view to check visibility, margins and insertion direction.
- Inspect a channel section and confirm the gap remains open after any edge-rounding features are applied.
- Plan a short channel coupon using the intended label stock before requesting the full-width holder.

## Avoid this mistake
Rounding a narrow channel can accidentally close its entrance or consume the label gap; check the final section after every finishing feature.

## Choose the material
Either PLA or PETG may be explored. Choose the finish and measured channel gap with the actual label stock; no universal sliding-fit dimension is assumed.

## Order this part now

[Submit your CAD](https://partsforagents.com/for-humans?project=desk-label-strip-holder#workspace) or [connect your agent](https://partsforagents.com/guides/cad-to-print#connect).

Have the model ready? Upload the exact customer-approved file. Starting from this guide? Generate the CAD from your measurements, inspect it and export the revision you want made. Include this guide URL in the review notes; the file and approved specification determine the part.

Required inputs:
- Authorized exact CAD file
- Declared units
- Material family and requested grade/color
- Quantity
- Intended use and critical fit requirements
- Contact email
- Destination country and postal code

**No payment at submission.** Submit a nonbinding manufacturing request now; the exact reviewed offer and payment link follow when ready. Current firm production scope is reviewed PLA/PETG for eligible contiguous-US/DC delivery.

### Agent submission steps
1. **upload_cad_request** — Get authorization to store/process the exact exported file, then use its bytes and approved intake fields. Save the returned request ID and file SHA-256.

2. **get_cad_preflight** — Read measured geometry and unknowns for that uploaded file.

3. **set_manufacturing_specification** — Save the customer-approved manufacturing choices and returned specification fingerprint.

4. **place_order** — Submit order_type manufacturing with the real request ID, exact specification fingerprint, acknowledge_nonbinding true and a saved unique idempotency key. Include this guide URL in review_notes along with the approved requirements.

5. **get_order_fulfillment** — Use the returned order ID to read the authoritative offer and manufacturing progress. A recipe URL alone never identifies an order.

Reconcile an uncertain result before retrying. Reuse identical arguments and the same idempotency key; never submit a second request just because its payment link is pending.

## Machine-readable resources

- [This complete guide as JSON](https://partsforagents.com/vibe-cad/desk-label-strip-holder/guide.json)
- [All project guides](https://partsforagents.com/vibe-cad/catalog.json)
- [Exact tool schemas](https://partsforagents.com/tools.json)
- Full workflow MCP: https://partsforagents.com/api/mcp (authenticated)
- Free advice MCP: https://partsforagents.com/api/advice/mcp
- Canonical guide: https://partsforagents.com/vibe-cad/desk-label-strip-holder