# How to make a desk cable-label flag with vibe CAD

Identify similar desk cables with a removable two-piece label flag sized around the jacket and readable from the normal viewing direction.

Category: Cable management. Difficulty: Beginner.

By partsforagents · AI-authored · Updated 2026-11-10.

## Make this project
An unvalidated identification accessory, not strain relief, electrical insulation or a cable restraint.

This recipe has not been physically validated. Create and inspect the exact CAD for your dimensions; a concept image is not an orderable CAD file.

## 1. Measure
- Measure the cable jacket at the intended label position without compressing it.
- Measure the printed label and choose its reading direction relative to the cable.
- Record nearby connector and desk clearances so the flag does not obstruct removal.
- Choose a loose jacket gap from a sample; do not infer clamping force from CAD.

## 2. Give your CAD agent this prompt

Model a two-piece cable-label flag with cable_diameter, jacket_gap, label_width, label_height, flag_offset and screw_hole_size. Use an open channel closed by a separate cover with measured fasteners. Ask for the fastener dimensions and intended reading direction. Do not add teeth, cable compression or an assumed snap fit.

## 3. Model and inspect
1. **Place the label face** — Sketch the cable centerline and orient the label beside it. Keep the face outside the connector insertion path and make the text visible from the desk.

2. **Split the channel** — Create matching upper and lower channel halves with a user-selected gap. Put closure features beside the channel so they cannot intrude into the jacket space.

3. **Prepare separate bodies** — Keep the cover and label body as distinct solids. Name both exports and include a section view showing the assembled jacket gap.

## 4. Check the prototype
- Use a paper flag on the unplugged cable to confirm readability and interference with neighboring connectors.
- Inspect the assembled section for protruding fasteners or edges inside the cable channel.
- Request a short channel sample before selecting final closure dimensions; no grip performance is established yet.

## Avoid this mistake
A label scaled to improve readability also changes its cable channel unless those parameters are separated.

## Choose the material
Consider PLA or PETG for the label body. Confirm the sample channel and edge finish; material choice does not establish acceptable jacket contact.

## Order this part now

[Submit your CAD](https://partsforagents.com/for-humans?project=desk-cable-label-flags#workspace) or [connect your agent](https://partsforagents.com/guides/cad-to-print#connect).

Have the model ready? Upload the exact customer-approved file. Starting from this guide? Generate the CAD from your measurements, inspect it and export the revision you want made. Include this guide URL in the review notes; the file and approved specification determine the part.

Required inputs:
- Authorized exact CAD file
- Declared units
- Material family and requested grade/color
- Quantity
- Intended use and critical fit requirements
- Contact email
- Destination country and postal code

**No payment at submission.** Submit a nonbinding manufacturing request now; the exact reviewed offer and payment link follow when ready. Current firm production scope is reviewed PLA/PETG for eligible contiguous-US/DC delivery.

### Agent submission steps
1. **upload_cad_request** — Get authorization to store/process the exact exported file, then use its bytes and approved intake fields. Save the returned request ID and file SHA-256.

2. **get_cad_preflight** — Read measured geometry and unknowns for that uploaded file.

3. **set_manufacturing_specification** — Save the customer-approved manufacturing choices and returned specification fingerprint.

4. **place_order** — Submit order_type manufacturing with the real request ID, exact specification fingerprint, acknowledge_nonbinding true and a saved unique idempotency key. Include this guide URL in review_notes along with the approved requirements.

5. **get_order_fulfillment** — Use the returned order ID to read the authoritative offer and manufacturing progress. A recipe URL alone never identifies an order.

Reconcile an uncertain result before retrying. Reuse identical arguments and the same idempotency key; never submit a second request just because its payment link is pending.

## Machine-readable resources

- [This complete guide as JSON](https://partsforagents.com/vibe-cad/desk-cable-label-flags/guide.json)
- [All project guides](https://partsforagents.com/vibe-cad/catalog.json)
- [Exact tool schemas](https://partsforagents.com/tools.json)
- Full workflow MCP: https://partsforagents.com/api/mcp (authenticated)
- Free advice MCP: https://partsforagents.com/api/advice/mcp
- Canonical guide: https://partsforagents.com/vibe-cad/desk-cable-label-flags