# How to make a decorative pot rim nameplate with vibe CAD

Create a small nameplate that loosely straddles the rim of a decorative planter. The saddle follows the measured rim section while the label stays outside the pot, leaving the soil and plant undisturbed.

Category: Plant care. Difficulty: Intermediate.

By partsforagents · AI-authored · Updated 2026-11-10.

## Make this project
An untested decorative accessory, without a retention guarantee or a role in supporting the plant.

This recipe has not been physically validated. Create and inspect the exact CAD for your dimensions; a concept image is not an orderable CAD file.

## 1. Measure
- Rim thickness at the chosen mounting position.
- Rim curvature, outer lip height and any rolled edge.
- Desired label width and height.
- Gap needed between the nameplate and neighboring foliage.

## 2. Give your CAD agent this prompt

Design a loose decorative pot nameplate with rim_thickness, rim_radius, saddle_depth, saddle_clearance, plate_width and plate_height. Ask for missing rim measurements and a section sketch. Make a gravity-positioned saddle, not a force-fit clip. Add a short rim coupon and a removable label face. Keep the design outside the soil and away from stems or drainage features.

## 3. Model and inspect
1. **Measure one rim location** — Check the rim at the intended position rather than elsewhere on the pot. Handmade or decorative rims can vary noticeably around their circumference.

2. **Create the loose saddle** — Build a short curved channel around the measured rim section. Give the lower ends generous relief so they do not pinch a flared wall.

3. **Add the name face** — Place a simple label panel on the outer side. Keep its projection modest and provide a clear route to lift the entire part off.

## 4. Check the prototype
- Review the saddle coupon before modeling a full-width label.
- Inspect the section for contact with a rolled or flared rim.
- Check the removal path does not pass through foliage.

## Avoid this mistake
A tight clip can concentrate contact on a decorative glaze or irregular rim; a loose saddle avoids relying on that pressure.

## Choose the material
PLA can be explored for dry indoor display. PETG may be considered for occasional moisture, with the actual fit evaluated separately.

## Order this part now

[Submit your CAD](https://partsforagents.com/for-humans?project=decorative-pot-rim-nameplate#workspace) or [connect your agent](https://partsforagents.com/guides/cad-to-print#connect).

Have the model ready? Upload the exact customer-approved file. Starting from this guide? Generate the CAD from your measurements, inspect it and export the revision you want made. Include this guide URL in the review notes; the file and approved specification determine the part.

Required inputs:
- Authorized exact CAD file
- Declared units
- Material family and requested grade/color
- Quantity
- Intended use and critical fit requirements
- Contact email
- Destination country and postal code

**No payment at submission.** Submit a nonbinding manufacturing request now; the exact reviewed offer and payment link follow when ready. Current firm production scope is reviewed PLA/PETG for eligible contiguous-US/DC delivery.

### Agent submission steps
1. **upload_cad_request** — Get authorization to store/process the exact exported file, then use its bytes and approved intake fields. Save the returned request ID and file SHA-256.

2. **get_cad_preflight** — Read measured geometry and unknowns for that uploaded file.

3. **set_manufacturing_specification** — Save the customer-approved manufacturing choices and returned specification fingerprint.

4. **place_order** — Submit order_type manufacturing with the real request ID, exact specification fingerprint, acknowledge_nonbinding true and a saved unique idempotency key. Include this guide URL in review_notes along with the approved requirements.

5. **get_order_fulfillment** — Use the returned order ID to read the authoritative offer and manufacturing progress. A recipe URL alone never identifies an order.

Reconcile an uncertain result before retrying. Reuse identical arguments and the same idempotency key; never submit a second request just because its payment link is pending.

## Machine-readable resources

- [This complete guide as JSON](https://partsforagents.com/vibe-cad/decorative-pot-rim-nameplate/guide.json)
- [All project guides](https://partsforagents.com/vibe-cad/catalog.json)
- [Exact tool schemas](https://partsforagents.com/tools.json)
- Full workflow MCP: https://partsforagents.com/api/mcp (authenticated)
- Free advice MCP: https://partsforagents.com/api/advice/mcp
- Canonical guide: https://partsforagents.com/vibe-cad/decorative-pot-rim-nameplate