# How to make a closet scarf folding template with vibe CAD

Fold scarves to a consistent width for an existing closet compartment using a removable flat template. Rounded edges and a broad pull notch help the board slide out of the folded fabric, leaving fringe and decorative ends outside the working area.

Category: Home organization. Difficulty: Beginner.

By partsforagents · AI-authored · Updated 2026-11-10.

## Make this project
An unprinted folding guide for closet organization; no fabric compatibility or crease-free storage performance is established.

This recipe has not been physically validated. Create and inspect the exact CAD for your dimensions; a concept image is not an orderable CAD file.

## 1. Measure
- Scarf width and length in its relaxed state.
- Usable closet-compartment width and depth.
- Desired folded width, including room for the fabric thickness.
- Length of fringe or decorative ends that should remain free.

## 2. Give your CAD agent this prompt

Design a removable scarf-folding board with folded_width, folded_length, board_thickness, corner_radius, pull_notch_width and edge_clearance. Ask for missing dimensions and the intended folding sequence. Use a plain flat surface, rounded perimeter and a broad removal notch. Show the scarf as a simple flexible reference sheet. Keep fringe outside the template and avoid teeth, clips, pins or raised decoration that could catch the fabric.

## 3. Model and inspect
1. **Plan the final folded footprint** — Fold a paper strip to the desired storage size and compare it with the closet compartment. Leave room for the actual scarf thickness rather than using every available millimeter.

2. **Create the rounded board** — Draw a flat rounded rectangle matching the chosen fold width. Keep its thickness independent of the outline and remove any small decorative features from the fabric-contact surfaces.

3. **Review the withdrawal path** — Add a broad notch at the edge that remains exposed during folding. Preview the board sliding straight out, with fringe and decorative ends clear of that path.

## 4. Check the prototype
- Try a cardboard outline with a spare fabric sample before finalizing the folding sequence.
- Review an edge coupon for roughness and snagging before considering the intended scarf.
- Compare the folded envelope with the compartment while allowing room to lift the scarf out.

## Avoid this mistake
A board sized to the full compartment width leaves no allowance for fabric wrapped around its edges and can produce an oversized folded bundle.

## Choose the material
PLA or PETG can be explored for the flat board. Surface finish and rounded edges require evaluation with expendable fabric, especially for delicate weaves.

## Order this part now

[Submit your CAD](https://partsforagents.com/for-humans?project=closet-scarf-folding-template#workspace) or [connect your agent](https://partsforagents.com/guides/cad-to-print#connect).

Have the model ready? Upload the exact customer-approved file. Starting from this guide? Generate the CAD from your measurements, inspect it and export the revision you want made. Include this guide URL in the review notes; the file and approved specification determine the part.

Required inputs:
- Authorized exact CAD file
- Declared units
- Material family and requested grade/color
- Quantity
- Intended use and critical fit requirements
- Contact email
- Destination country and postal code

**No payment at submission.** Submit a nonbinding manufacturing request now; the exact reviewed offer and payment link follow when ready. Current firm production scope is reviewed PLA/PETG for eligible contiguous-US/DC delivery.

### Agent submission steps
1. **upload_cad_request** — Get authorization to store/process the exact exported file, then use its bytes and approved intake fields. Save the returned request ID and file SHA-256.

2. **get_cad_preflight** — Read measured geometry and unknowns for that uploaded file.

3. **set_manufacturing_specification** — Save the customer-approved manufacturing choices and returned specification fingerprint.

4. **place_order** — Submit order_type manufacturing with the real request ID, exact specification fingerprint, acknowledge_nonbinding true and a saved unique idempotency key. Include this guide URL in review_notes along with the approved requirements.

5. **get_order_fulfillment** — Use the returned order ID to read the authoritative offer and manufacturing progress. A recipe URL alone never identifies an order.

Reconcile an uncertain result before retrying. Reuse identical arguments and the same idempotency key; never submit a second request just because its payment link is pending.

## Machine-readable resources

- [This complete guide as JSON](https://partsforagents.com/vibe-cad/closet-scarf-folding-template/guide.json)
- [All project guides](https://partsforagents.com/vibe-cad/catalog.json)
- [Exact tool schemas](https://partsforagents.com/tools.json)
- Full workflow MCP: https://partsforagents.com/api/mcp (authenticated)
- Free advice MCP: https://partsforagents.com/api/advice/mcp
- Canonical guide: https://partsforagents.com/vibe-cad/closet-scarf-folding-template